Bow DTF & Rhinestone Overlay: Read Instructions. Approx. 8.5" x 7"

$13.00 USD
Shipping calculated at checkout.

Beautiful printed detail with an extra layer of sparkle.  

Approx. 8.5" x 7" 

These two-part DTF Iron On transfer sets pair a colorful DTF iron-on design with a coordinating rhinestone overlay. Apply the printed design first, then align and press the rhinestone layer to add light-catching accents. The rhinestones arrive arranged on a carrier sheet—no placing individual stones!

Create a special shirt or sweatshirt for yourself, a thoughtful handmade gift, or a sparkling addition to your boutique creations.

Each set includes:

  • One printed DTF transfer

  • One coordinating rhinestone overlay

Application Instructions

Using Household iron
DTF with Rhinestone Overlay | Print first. Rhinestones second.

Before you start: Choose a clean, dry cotton garment that allows a hot iron. Use a firm,
heat-safe surface and pressing mat. Avoid padded ironing boards and seams beneath the design.
Settings are starting points: test on a spare garment first.

FIRST: APPLY THE PRINTED PICTURE
1. Prepare. Set the iron to COTTON, with steam OFF. Let it heat fully. Briefly
iron the plain fabric to remove wrinkles and moisture.
2. Position. Put the printed side against the fabric, clear film on top. Check that
the lettering looks correct. Leave the film attached; cover with baking
parchment, not wax paper.
3. Press. Hold the iron still with firm pressure for 20 seconds per section. Lift
and move with a slight overlap. Cover every area, including beneath steam holes.
Do not slide the iron.
4. COOL completely, then peel. Slowly peel the film back close to the shirt. If
the print lifts, lower the film, cover and press that spot for 5 more seconds. Cool
and check again. If it still lifts, stop and contact us.

NEXT: ADD THE RHINESTONES
5. Remove the backing. Lay the rhinestone sheet face down. Peel off its
protective backing; leave the stones on the sticky clear sheet. Use tweezers to
straighten any shifted stones.
6. Align. After removing the printed layer's film, line up the flat backs of the
stones against the picture. Keep the sticky clear sheet on top and gently smooth it
into place.
7. Press from the BACK. Turn the shirt inside out without shifting the stones.
Keep the carrier attached. Place the design face down on the mat; move the other
shirt layer aside. Press directly behind the design at the dry cotton setting for 15
seconds per section. Hold still; lift and overlap.
8. Peel WARM. Turn right side out. When safe to handle but still warm, slowly peel
the carrier. If stones lift, lower the sheet and contact us before repeatedly
reheating.
Let it cool. Then wear and enjoy. Wait 24 hours before washing. Turn inside out; wash cold on a gentle cycle with mild detergent. Hang or lay flat to dry. No bleach, tumble drying or ironing directly on the design.Cricut

With Cricut EasyPress

Before you start: Use a clean, dry garment that tolerates the temperatures below. Work on a
pressing mat over a firm, heat-safe surface. Keep seams out from beneath the design. Test on a
spare garment first. These directions do not cover the EasyPress Mini.

FIRST: APPLY THE PRINTED PICTURE
1. Prepare. Set the EasyPress to 320°F / 160°C. Briefly preheat the plain fabric to
remove wrinkles and moisture, then smooth it flat.
2. Position. Put the printed side against the fabric, clear film on top. Check that
the lettering looks correct. Cover with baking parchment or a suitable nonstick
pressing sheet.
3. Press. Hold still for 10 seconds with medium pressure. For a design larger
than the plate, lift and move with a small overlap; give each section the full press
time.
4. COOL completely, then peel. Slowly peel the film back. If the print lifts, lower
the film, replace the cover sheet and press that area for 5 more seconds. Cool
and check again. If it still lifts, stop and contact us.
NEXT: ADD THE RHINESTONES
5. Heat and prepare. Increase to 360°F / 182°C. Lay the rhinestone sheet face
down and remove its protective backing. Leave the stones on the sticky clear
sheet; straighten shifted stones with tweezers.
6. Align. After removing the printed layer's film, line up the flat backs of the
stones against the picture. Keep the clear carrier on top and gently smooth it in
place.
7. Press from the BACK. Turn the shirt inside out without shifting the stones.
Keep the carrier attached. Lay the design face down on the mat and move the
other shirt layer aside. Press directly behind the design for 15 seconds with
medium pressure. If needed, press in sections with a small overlap.
8. Peel WARM. Turn right side out. When safe to handle but still warm, slowly peel
the carrier. If stones lift, lower the sheet and contact us before repeatedly
reheating.
Let it cool. Then wear and enjoy.
Wait 24 hours before washing. Turn inside out; wash cold on a gentle cycle with mild
detergent. Hang or lay flat to dry. No bleach, tumble drying or ironing directly on the design

A4 Papers are letter size sheets 8.27 x 11.7 inches

A3 Paper is 11.69x16.54 inches. Think legal size.

Secure online payment

Description

Description

Beautiful printed detail with an extra layer of sparkle.  

Approx. 8.5" x 7" 

These two-part DTF Iron On transfer sets pair a colorful DTF iron-on design with a coordinating rhinestone overlay. Apply the printed design first, then align and press the rhinestone layer to add light-catching accents. The rhinestones arrive arranged on a carrier sheet—no placing individual stones!

Create a special shirt or sweatshirt for yourself, a thoughtful handmade gift, or a sparkling addition to your boutique creations.

Each set includes:

  • One printed DTF transfer

  • One coordinating rhinestone overlay

Application Instructions

Using Household iron
DTF with Rhinestone Overlay | Print first. Rhinestones second.

Before you start: Choose a clean, dry cotton garment that allows a hot iron. Use a firm,
heat-safe surface and pressing mat. Avoid padded ironing boards and seams beneath the design.
Settings are starting points: test on a spare garment first.

FIRST: APPLY THE PRINTED PICTURE
1. Prepare. Set the iron to COTTON, with steam OFF. Let it heat fully. Briefly
iron the plain fabric to remove wrinkles and moisture.
2. Position. Put the printed side against the fabric, clear film on top. Check that
the lettering looks correct. Leave the film attached; cover with baking
parchment, not wax paper.
3. Press. Hold the iron still with firm pressure for 20 seconds per section. Lift
and move with a slight overlap. Cover every area, including beneath steam holes.
Do not slide the iron.
4. COOL completely, then peel. Slowly peel the film back close to the shirt. If
the print lifts, lower the film, cover and press that spot for 5 more seconds. Cool
and check again. If it still lifts, stop and contact us.

NEXT: ADD THE RHINESTONES
5. Remove the backing. Lay the rhinestone sheet face down. Peel off its
protective backing; leave the stones on the sticky clear sheet. Use tweezers to
straighten any shifted stones.
6. Align. After removing the printed layer's film, line up the flat backs of the
stones against the picture. Keep the sticky clear sheet on top and gently smooth it
into place.
7. Press from the BACK. Turn the shirt inside out without shifting the stones.
Keep the carrier attached. Place the design face down on the mat; move the other
shirt layer aside. Press directly behind the design at the dry cotton setting for 15
seconds per section. Hold still; lift and overlap.
8. Peel WARM. Turn right side out. When safe to handle but still warm, slowly peel
the carrier. If stones lift, lower the sheet and contact us before repeatedly
reheating.
Let it cool. Then wear and enjoy. Wait 24 hours before washing. Turn inside out; wash cold on a gentle cycle with mild detergent. Hang or lay flat to dry. No bleach, tumble drying or ironing directly on the design.Cricut

With Cricut EasyPress

Before you start: Use a clean, dry garment that tolerates the temperatures below. Work on a
pressing mat over a firm, heat-safe surface. Keep seams out from beneath the design. Test on a
spare garment first. These directions do not cover the EasyPress Mini.

FIRST: APPLY THE PRINTED PICTURE
1. Prepare. Set the EasyPress to 320°F / 160°C. Briefly preheat the plain fabric to
remove wrinkles and moisture, then smooth it flat.
2. Position. Put the printed side against the fabric, clear film on top. Check that
the lettering looks correct. Cover with baking parchment or a suitable nonstick
pressing sheet.
3. Press. Hold still for 10 seconds with medium pressure. For a design larger
than the plate, lift and move with a small overlap; give each section the full press
time.
4. COOL completely, then peel. Slowly peel the film back. If the print lifts, lower
the film, replace the cover sheet and press that area for 5 more seconds. Cool
and check again. If it still lifts, stop and contact us.
NEXT: ADD THE RHINESTONES
5. Heat and prepare. Increase to 360°F / 182°C. Lay the rhinestone sheet face
down and remove its protective backing. Leave the stones on the sticky clear
sheet; straighten shifted stones with tweezers.
6. Align. After removing the printed layer's film, line up the flat backs of the
stones against the picture. Keep the clear carrier on top and gently smooth it in
place.
7. Press from the BACK. Turn the shirt inside out without shifting the stones.
Keep the carrier attached. Lay the design face down on the mat and move the
other shirt layer aside. Press directly behind the design for 15 seconds with
medium pressure. If needed, press in sections with a small overlap.
8. Peel WARM. Turn right side out. When safe to handle but still warm, slowly peel
the carrier. If stones lift, lower the sheet and contact us before repeatedly
reheating.
Let it cool. Then wear and enjoy.
Wait 24 hours before washing. Turn inside out; wash cold on a gentle cycle with mild
detergent. Hang or lay flat to dry. No bleach, tumble drying or ironing directly on the design
Shipping

Shipping

All orders are shipped via USPS first class or priority mail. We use a tracking number for proof of delivery.

We ship our decoupage papers flat with cardboard to assure it travels as safe as possible. You will receive USPS tracking to follow along.
 Any creases/bends will work themselves out during the decoupage process. If you prefer, iron on low dry heat but do not steam.
All Sales are Final

All Sales are Final

We do not accept returns. If you have any problems with your purchase, please contact us and we'll do our best to assist. We care.